Bitmain Antminer maintenance course

Bitmain Antminer maintenance course

Introduction to Antminer Maintenance Training Center (Maintenance Training Guide)

I. What is Antminer Maintenance Training Center (AMTC)?

Bitmain antminer maintenance course , has been keeping eye on the dissemination of its product knowledge and the inheritance of technological capabilities since its establishment in 2013. Bitmain has been committed to enhancing the integral standard of the related personnel and promoting ecologically sustainable development in this field with its initial internal training and the ‘VIP Customers Maintenance Training’ launched in 2017.

‘Antminer Maintenance Training Center’ is a training service upgrading project (hereinafter referred to as ‘AMTC’) launched by Bitmain based on years of knowledge dissemination and technology inheritance and accumulation. It is the only training institution and certification authority in the industry that is officially certified by Antminer.

AMTC is aiming to allow more participants to further develop the professional skills needed in maintaining Antminers. Currently, AMTC offers two courses, Maintenance Training and Operations Training, participants can attend the appropriate training course in accordance with their own demands. Bitmain antminer maintenance course.

II. When does AMTC begin?

AMTC begins when the number of registered participants reaches 16 for each quarter of the year (Successful registrants will be set in accordance with payment order). The duration of each training period is two weeks.

Company Add: Building No.7, Pengcheng Logistics Park, Shajing Subdistrict,Bao’an District, Shenzhen, China

Training Site: Maintenance Training Room on the Fourth Floor, Shenzhen Century Cloud Core Technologies Ltd.

III. What will you learn in AMTC?

At present, AMTC provides the level-1 maintenance training course and the level-2 maintenance training course. The specific contents are as follows:

“Twenty years from now you will be more disappointed by the things that you didn’t do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover.”

– Jackson Brown Jr

IV. What will you receive after successfully completing the AMTC course?

Successful participants will receive a “Certificate of Accomplishment” corresponding to their skill level. AMTC certificates will be used as the global standards in classifying an individual’s maintenance ability to repair Antminers. The certificate shall also be used in reference to set an individual’s maintenance fee price. In addition, extra awards have also been prepared for excellent participants of each period!

The information below is achievements levels and further accomplishments

Type of CertificateIssue ToCertificate SignificanceEntitlement
Level 1 QualificationThe participant who has passed the graduation examination of the level 1 courseBasic miner maintenance abilityAuthorization to buy materials
Level 2 QualificationThe participant who has passed the graduation examination of the level 2 courseAdvanced miner maintenance abilityAuthorization to buy materials
Excellent PerformanceThe participant who has passed the graduation examination and ranked second and third in the training examination of the current periodOutstanding performance in the current training periodAuthorization to buy materials
Top PerformanceThe participant who has passed the graduation examination and ranked first in the training examination of the current periodBest performance in the current training period
Authorization to buy materials; enjoy the reduction or exemption of all training fees (for the fees that have been paid only)

*  If there are less than 16 participants, AMTC may adjust the selection rules for the top performance certificate during the period..

V. How much is the fee?

In order to ensure the training quality and provide a better service to participants, AMTC will charge appropriate fees.

1. Charges Notes:

International Maintenance Training PackageService ContentFee (USD)
Package Option
Package A1. Maintenance training, training PPT
2. Lunch and training translation during training
3. Maintenance training tools
1000/Person
Package B1. Maintenance training, training PPT
2. Lunch, dinner, training translation, airport pick up(7:00 a.m.-11:00 p.m.) and drop off, accommodation, and hotel pick up and drop off during training
3. Maintenance training tools
2500/Person
Package C
(Only for level-2 maintenance course)
1. Maintenance training, training PPT
2. Lunch and training translation during training
850/Person
Package D
(Only for level-2 maintenance course)
1. Maintenance training, training PPT
2. Lunch, dinner, training translation, airport pick up(7:00 a.m.-11:00 p.m.) and drop off, accommodation, and hotel pick up and drop off during training
2350/Person

Note: Maintenance training tools include Hashboard tester, Heat gun, Soldering iron, Multimeter, USB adapter, Bevel cutter, Tweezers, Blade, Solder Tip.

Once the application is approved, the system status will switch to “Approved”, please fulfill the payment in “My Service Order”.

(Please follow the steps to complete the payment: shop.bitmain.com >> Log into your account >> User Center >> After-sales Service >> My Service Order >> Pay)

*Training arrangement will be set according to the participant’s payment order, and the paid tuition is nonrefundable.

2. The fee shall be deducted or waived in such cases

① Providing the individual who will attend the training possesses a diploma in electronics or relevant national certified maintenance technician certificate, there will be a $30 discount for the order.

② Retaking the training for free (No service will be offered including food, accommodation and tools, etc.)

Note: The trainee who failed the final examination can reapply for the training for free within 30 days after the completion of the current training (No service will be offered including food, accommodation and tools, etc.). The personnel participating in the training is forbidden to change. Each training order only has one chance to reapply. Besides, the trainee shall not participate in the selection of the “Best Student”.

③ Meeting other preferential policies.

Coupons shall not be used in combination, the coupon with the highest value shall prevail.

VI. Preparations before Training

1. Essential Preparation

Each participant needs to bring 1 computer, 1 USB disk (16G), 4 microSD cards(8G),1 adapter(for tester) and 1 card reader.

No.CategoryQuantityUnit
Referential Purchase Link
1

Laptop

(Windows System)

1/ 
2USB-16G1/
3SD Card-8G4/
4Adapter for Test Jig1/
5Card Reader1/

2. Optional Preparation 

For the individual who has chosen Package C and Package D in the application of the Level-2 Maintenance Course, please note that you shall purchase the tools shown below by yourself and take the tools to the training site:

*There is no need for the trainee to purchase the hashboard tester since it will be provided when training; it is forbidden to take it away after the training ends.

CategoryQuantityUnitReferential Purchase Link
Heat Gun1Piecehttps://item.jd.com/10144235423.html
Soldering Iron1Piecehttps://item.jd.com/10144633907.html
Multimeter1Piecehttps://item.jd.com/10248733275.html
USB Adapter1/http://url.cn/48LV8rC
Bevel Cutter1/https://item.jd.com/10095357230.html
Tweezer1Pairhttps://item.jd.com/1364053.html
Blade Holder+Blade1Sethttps://item.jd.com/16013614556.html
Knife-shaped Solder Tip1/https://item.jd.com/1633656.html

VII. How to apply to join AMTC?

Apply online through the official website:https://shop.bitmain.com/support/apply/create

Contact Antminer sales for more help now!

China:haiyun.zou@bitmain.com

Europe, Middle East&CIS:yucheng.ji@bitmain.com

Asia-Pacific & North, Central, and South America:ziyang.he@bitmain.com

 

OR Apply Online here>>

_3A9E4690-9739-4907-BE22-B01CA607AB7B__20200113152930.jpg 

Ⅷ. Matters needing attention during the stay at AMTC

1. The trainee’s information is consistent with the registration form, specifically for checking the ID card into the factory area;

2. No luggage is allowed to be brought into the factory area;

3. Smoking and photography are prohibited in the factory and once found, the assessment qualification will be canceled;

4. Training time: 8:30-18:00, being late and leaving early for 3 times will result in disqualification;

5. Smoking is not allowed in the park during the training period (no more than 10 minutes of smoking outside in the morning and afternoon); during the training, it is not allowed to eat or sleep in the workplace, and it is not allowed to hang out in other parts of the company;

6. Toolboxes are not allowed to be placed under the table, and the workplaces must be neat and tidy;

7. Examine theoretical knowledge and manual work. Each group exchanges the engineer for assessment, and no maintenance machine will be issued if they fail to pass;

8. It is strictly forbidden to modify the miner configuration of the teaching mining machines without permission and obtain the illegal profits; once found, he/she may not be qualified to take the assessment;

9. Cheating and substitution are strictly prohibited in the exam. If any violation of discipline is found in the exam, the exam qualification will be canceled and the results will be invalidated;

10. Tools, machines and scrap boards need to be signed for collection, and if they are lost, compensation shall be made at the same price;

11. If man-made damage leads to scrap, compensation shall be made at the same price.

4 Comments

  • I am 6 feet tall and 220 lbs. This shirt fit me perfectly in the chest and shoulders. My only complaint is that it is so long! I like to wear polo shirts untucked. This shirt goes completely past my rear end. If I wore it with ordinary shorts, you probably wouldnt be able to see the shorts at all – completely hidden by the shirt. It needs to be 4 to 5 inches shorter in terms of length to suit me. I have many RL polo shirts, and this one is by far the longest. I dont understand why.

  • If I wore it with ordinary shorts, you probably wouldnt be able to see the shorts at all – completely hidden by the shirt. It needs to be 4 to 5 inches shorter in terms of length to suit me. I have many RL polo shirts, and this one is by far the longest. I dont understand why.

    • My only complaint is that it is so long! I like to wear polo shirts untucked. This shirt goes completely past my rear end

  • Magnificent site. A lot of helpful informations here. I am sending it to some friends ans additionally sharing in delicious. And certainly, thank you for your sweat! I also appreciate the costumer services and prompt delivery

Leave a Reply

Your email address will not be published. Required fields are makes.